NGLISH
1. Installation Steps
To ensure N1MM+ works correctly for the contest, you must place the files in the correct folders.

UDC Files (TRHFSSB_DX.udc, TRHFSSB_TA.udc):
Your placing for the UDC files should be the folder you set for the User files, normally, C:\Users\username\Documents\N1MM Logger+\UserDefinedContests (or where you located the 'User' Folders at installation).

Section File (TA-PROV.sec):
The Section file (TA-PROV.sec) goes into the \SupportFiles folder, NOT the UDC folder, as stated in the Read-me file. The full path is typically C:\Users\username\Documents\N1MM Logger+\SupportFiles.

Final Step in N1MM+:
After copying the files and selecting the contest in N1MM+, click on the 'Import Section List' Button (usually at the lower right) to load the Turkish provinces as multipliers.

2. Important Usage Notes & Rules
You must select the correct contest type based on your location. The rules change depending on whom you are contacting (QSO). During data entry, pay attention to the fields below.

If you are a Turkish (TA) Station:

In N1MM+, you must select: 

Turkiye HF SSB Contest TA Station.


Your sent exchange is always your 

RS report + 2-digit province code.

When contacting another TA station, you will receive their province code.

Leave the RcvNr (Received Number) field blank.

When contacting a DX station, you will receive a serial number.

Leave the TAProv (TA Province) field blank.

If you are a Foreign (DX) Station:

In N1MM+, you must select: 

Turkiye HF SSB Contest DX Station.


Your sent exchange is always your 

RS report + serial number (starting from 001).

When contacting a TA station, you will receive their 2-digit province code.

Leave the RcvNr (Received Number) field blank.

When contacting another DX station, you will receive a serial number.

Leave the TAProv (TA Province) field blank.

Special Point Rule:

Remember that for all operators, QSOs on the 

160m and 80m bands receive double points.


TÜRKÇE
1. Kurulum Adımları
N1MM+'ın yarışma için doğru çalışmasını sağlamak amacıyla dosyaları doğru klasörlere yerleştirmelisiniz.

UDC Dosyaları (TRHFSSB_DX.udc, TRHFSSB_TA.udc):
UDC dosyalarını yerleştirmeniz gereken yer, Kullanıcı dosyaları için ayarladığınız klasördür. Bu normalde 

C:\Users\kullanıcıadınız\Documents\N1MM Logger+\UserDefinedContests yoludur  (veya kurulum sırasında 'Kullanıcı' klasörlerini belirlediğiniz başka bir yer) .





Section Dosyası (TA-PROV.sec):
Section dosyası (

TA-PROV.sec), Read-me dosyasında belirtildiği gibi UDC klasörüne DEĞİL, \SupportFiles klasörüne kopyalanmalıdır. Tam yol genellikle 


C:\Users\kullanıcıadınız\Documents\N1MM Logger+\SupportFiles şeklindedir.

N1MM+'ta Son Adım:
Dosyaları kopyalayıp N1MM+'ta yarışmayı seçtikten sonra, Türkiye illerini çarpan olarak yüklemek için 

'Import Section List' (Bölüm Listesini İçe Aktar) düğmesine tıklayın.

2. Önemli Kullanım Notları ve Kurallar
Bulunduğunuz yere göre doğru yarışma türünü seçmelisiniz. Kiminle QSO yaptığınıza bağlı olarak kurallar değişir. Veri girişi sırasında aşağıdaki alanlara dikkat ediniz.

Eğer Türk (TA) İstasyonu iseniz:

N1MM+'ta seçmeniz gereken yarışma: 

Turkiye HF SSB Contest TA Station.


Göndereceğiniz exchange her zaman 

RS raporu + 2 haneli il kodunuzdur.

Başka bir TA istasyonu ile QSO yaptığınızda, karşı tarafın il kodunu alırsınız.

RcvNr (Alınan Numara) alanını boş bırakın.

Bir DX istasyonu ile QSO yaptığınızda, karşı taraftan seri numarası alırsınız.

TAProv (TA İli) alanını boş bırakın.

Eğer Yabancı (DX) İstasyonu iseniz:

N1MM+'ta seçmeniz gereken yarışma: 

Turkiye HF SSB Contest DX Station.


Göndereceğiniz exchange her zaman 

RS raporu + seri numarasıdır (001'den başlar).

Bir TA istasyonu ile QSO yaptığınızda, karşı tarafın 2 haneli il kodunu alırsınız.

RcvNr (Alınan Numara) alanını boş bırakın.

Başka bir DX istasyonu ile QSO yaptığınızda, karşı taraftan seri numarası alırsınız.

TAProv (TA İli) alanını boş bırakın.

Özel Puan Kuralı:

Tüm operatörler için 

160m ve 80m bantlarında yapılan QSO'ların iki katı puan kazandırdığını unutmayın.